Garrett G Series G25-660 REVERSE Turbo

G Series turbochargers feature the latest innovations in turbocharger technology. Advanced compressor and turbine aero offer enthusiasts a wide range of performance boosting solutions for 2.0L - 12.0L engine platforms. Available in a variety of turbine housing options, it’s easy to select the right turbocharger for your application. To make choosing the right turbo easier, the G Series naming convention includes the maximum rated horsepower. For example a Garrett G37-900 is rated at 900 BHP.

• Ultra High Flow G-Series Turbine Wheel
• Advanced aerodynamics G Series Compressor Wheel
• Fully machined speed sensor and pressure ports
• Oil restrictor and water fittings included with purchase
• One piece center housing and backplate for increased durability
• Compact Standard Package
• Four water jacket ports for customizable installation
• Ball Bearing CHRA Rotating Assembly
• Standard & Reverse rotation (spins counterclockwise) options available
• Mar-M turbine wheel material rated up to 1050° C | 1922° F
• Stainless steel turbine housings for temperatures up to 1050° C | 1922° F
• +20% More Horsepower & Quicker Spool over comparable competitive turbochargers.

Featuring the latest advanced ultra high flow aerodynamic designs with the Garrett G Series Turbine Wheel, the G Series models offer previously unobtainable improvements in spool and power levels by frame sizeThe G-Series Turbine wheel is constructed of Mar-M super alloy material. This material is designed to withstand up to 1050° C - that’s 200 degrees more than inconel turbine wheels! The newly engineered turbine wheel with optimized G Series aerodynamics increases flow up to 15% (Compared to GTX Gen II) more than the GTX and has a peak efficency of 74%.

All G-Series utilize a V-Band turbine housing to CHRA connevtion. This improves the ease of installation, clocking, and servicing the turbocharger. Each turbocharger includes a -4AN oil restrictor fitting with a 1MM restriction orifice to provide the turbo with the reccomended 40PSI of oil pressure. Four large water jacket ports increase cooling capacity and allow enthusiasts to customize water line routing to help improve the installation process. The turbocharger comes with two -6AN fittings and two plugs. 

*Recommended to install waterlines on opposite sides of housing.*

• Compressor Wheel Exducer: 67mm
• Compressor Wheel Inducer: 54mm
• Compressor Wheel Trim: 65
• Compressor Wheel Material: Forged Billet Aluminum Alloy
• Compressor Wheel A/R: 0.70 A/R
• Max Flow Rate: 61 lb/min
• Max Recommended Turbo Shaft Speed: 165000 RPM
• Compressor Housing Connections:
  • Inlet: 3.0″ Hose Coupler
  • Outlet: 2.0″ Hose Coupler

• Turbine Wheel Exducer: 49mm
  
• Turbine Wheel Inducer: 54mm
  
• Turbine Wheel Trim: 84
  
• Turbine Wheel Material: Mar-M
  
• Turbine Wheel Max Temp: 1050C / 1922F
  
  • Housing Size and A/R ratio: G-Series G25-660 is available in five (5) different turbine housing configurations:0.49 A/R T25 Single Scroll Inlet, V-Band Outlet w/ Internal Wastegate
    
  • 0.72 A/R V-Band Single Scroll Inlet, V-Band Outlet
    
  • 0.92 A/R V-Band Single Scroll Inlet, V-Band Outlet
    
  • 0.72 A/R V-Band Single Scroll Inlet, V-Band Outlet w/ Internal Wastegate
    
  • 0.92 A/R V-Band Single Scroll Inlet, V-Band Outlet w/ Internal Wastegate 

If you would like to add 2000f Ceramic Coating to Housing Black or Silver it easier to message us after your order